2020. 11. 4. 10:55ㆍ카테고리 없음
Operating manual and Software guide) 31 Sticker for Multi-key Operation and CS. Increments on the analog scale from f/0.7 to 90, while L-758 CINE displays it in either. Can be purchased separately and user-installed into the Sekonic L-758D and L-758Cine meters. Sekonic L 758 Cine User Manual Buy Sekonic L-758Cine DigitalMaster Light Meter features For Ambient and Flash The user's manual is fine for the simpler functions but is definitely lacking. I am testing out a Sekonic L-758Cine. I was going to make some profiles but I have the Find More Solutions. Users Online. View all Reply. Topic Options.
-8-
5.
Auto Power Off function
1.
To conserve battery power, the meter will turn off about twenty minutes after last use.
2.
Whether the Auto Power Saving feature turns the power off or the Power button
is pressed,
the settings and measured values remain stored in memory. When the Power button is pressed
again the last settings are displayed.
Reference:
• The power shuts off automatically after 1 minute when the power button is pressed and held.
• Auto power off time is adjustable in Custom settings. (See page 40 for details)
6.
Setting ISO 1 sensitivity
1.
Hold down the ISO1 button
and turn the Jog wheel
to select the desired ISO sensitivity.
2.
You can also change the ISO sensitivity after taking
measurements. The new value is automatically
displayed.
7.
Setting ISO 2 sensitivity
1.
This feature is useful when using a different ISO
sensitivity (film or digital), Polaroid proofing film, or for
exposure correction (when using a filter, extension
tubes, bellows factor or another camera etc.).
2.
Hold down the ISO 2 button
and turn the Jog wheel
to select the desired ISO sensitivity.
3.
Once this is set, after taking a measurement, the mea-
sured value for the second ISO sensitivity will be dis-
played when the ISO 2 button is pressed.
4.
You can also change the second ISO sensitivity after
taking measurements. The new value is automatically
displayed.
3. Before Using
4.
Replacing the battery during measurement or when using the memory function
1.
Always turn the power OFF before replacing the battery. If the battery is removed with the
power ON, measurements and settings in memory can no longer be recalled.
2.
If after replacing the battery, or during measurements, strange screens (displays that have not
been set) appear on the LCD, or nothing happens, no matter what button is pushed, remove the
battery and wait at least ten seconds and then replace the battery. This allows the software to
automatically reset.
WARNING:
• Never place batteries in fire, short, disassemble, or heat them. The batteries might break
Sekonic L-758 Cine
down, and cause an accident, injury or pollute the environment.
Reference:
• The following settings are possible when using custom setting function P40.
1. It is possible to set ISO 2 for Filter compensation. These values can be set within a range of
±
5 EV in 1/10 steps and are display in the ISO 2 area.
2. Filter factor number compensation enables you to set seven types of filters frequently used
in the CINE industry. (Kodak Wratten Filters)(L-758CINE only)
NOTE:
• A three second pause between power on and off is recommended to avoid damage to
the meter.
Sekonic LDR / LD / L Cine Posted ‘ The next page If you find this manual useful, how about a donation of $3 to: M. Butkus, 29 Lake Ave. Camera manuals and free digital camera pdf instructions. Find the user manual you need for your camera and more at ManualsOnline. View and Download Sekonic L operating manual online. Sekonic Operating Manual Digital Camera LDR, LD, L L Measuring Instruments.
| Author: | Nikojar Nilabar |
| Country: | Hungary |
| Language: | English (Spanish) |
| Genre: | Relationship |
| Published (Last): | 12 June 2005 |
| Pages: | 278 |
| PDF File Size: | 17.34 Mb |
| ePub File Size: | 16.70 Mb |
| ISBN: | 610-6-97469-563-6 |
| Downloads: | 69514 |
| Price: | Free* [*Free Regsitration Required] |
| Uploader: | Meziramar |
Sekonic L 758 Cine
An exposuremeter, a camera, and a flash can all be connected at thesame time.
TONE button to set it as the Mid-tone value. If you want to quickly view the content of pages found on the sekonic l-758dr manual pages of the manual, you can use them. The ready to measure mode will continuefor approximately 90 seconds.
Reflected Measurement Mode spot metering This method measures the brightness luminance of thelight reflected from the subject. Page 65 Memo Averaging Function, Contrast Function 6. Incident Measurement Mode Incident light measuring is the measurement method that employs either the Lumisphere or Lumidisc sekonic l-758dr manual.
Incident operation Summary of the content on l7-58dr page No.
Only one digit is displayed if the cumulative number is ten or more. If looking through the Sekonic LDR user manual directly on this website is not convenient for you, there are two possible solutions:. The angle can be set in the range of 1 to 10 in 1 steps15 – in 5 steps sekonic l-758dr manual well as, 121722mmanual If the battery is removed with sekonic l-758dr manual power ON, p-758dr and settings in memory can no longer be recalled.
Measuring electronic flashThis method of measurement can be done in the following modes; with cord, without cord, andWireless flash radio triggering mode manua, or non-cumulative.
This feature can be used in the following modes;Ambient light: Cinematography Cinematography sekonic l-758dr manual. If the battery is removed with thepower ON, measurements and settings in memory can no longer be recalled.
Under such conditions, it is recommended that you sekonic l-758dr manual the meter in the cordless flash mode, or wireless flash radio triggering mode and keep the Synchro terminal cap in place. Turn the Jog wheel to select the Cine Speed for thecamera that will be used. Please note that all reviews submitted are moderated and subject to approval.
Sekonic L-758 Cine Manual
Page 57 4 Setting Mid. Advanced Functions Averaging function This function displays the average of up to nine of the values in memory. Flash Sekonic l-758dr manual Function L-758df Youcan make calibration compensation independently for both incident, and manyal light.
Sekonic L 308s Manual
Sekonic Light Meter: LDR DigitalMaster Exposure Meter – Instruction Manuals
Learning how to calibrate and use this meter, thanks to Joe Brady’s great videos, has changed my images and how I shoot dramatically. In addition, since film and digital cameras sekonic l-758dr manual their own unique dynamic range, clipping point expo- sekonic l-758dr manual tolerance and varying ISO sensitivity they need to be profiled. TONE buttonto set it as the Mid-tone value. First enter the memory recall modeby pressing and holding the MODE button, while pressing the Memory button.
Memory buttonIndicator of readingSet shutter speed4. Film exposures should be evaluated by scanning the film first and then evaluating the images in a photo application software.
Sekonic LDR / LD / L Cine instruction manual, user manual, PDF manual, free manuals
Memory buttonWhen the AVE. Don’t have an account? Summary of the content on the page No. Reflected Measurement Mode spot Metering 4. Enter text from picture: For explanation purposes, the display illustrated here shows all icons and readouts simultaneously. Or point us to the URL sekonic l-758dr manual the manual is located. Select setting number 1 and item number 2 in the custom setting mode see page Measurements that exceed the clippingpoints will be sekonic l-758dr manual as fast blinking ” “icons.
Sekonic L-758DR Digital Camera User Manual
Exposurecompensation may be necessary when compensation for filters, bellows, extension tube, etc isrequired. Highlight and shadow compensation values can also be enter for quick exposure metering. Set meter to spot reading for reflected light. By pressing ‘print’ button you will sekonic l-758dr manual only current page. Part 1 Get flash to see this player.
Provides the reference information and related functions t. When a Seionic zone is activated, the corresponding Quad-Triggering zone letter appears on the display. Digitalmaster ldDigitalmaster ldrDigitalmaster lcine. Below you will find previews of the content of the user manuals presented on the following pages sekonic l-758dr manual Sekonic LDR. I passed your comment to Joe.
Measuring ambient lightIn this measurement mode, we have the choice mabual shutter priority mode, aperture priority mode orEV mode. Don’t show me this sekonic l-758dr manual again. It is useful for distant objects such as landscapes, when you cannot go to the position of the subject, or for metering subjects that generate light neon signs, sekonic l-758dr manual.
Auto-reset Cordless Flash Mode 5. Custom Setting Function 6.
Most 10 Related